Standard NS Series Slurry Pump - Superior Performance for Palm Oil Industry Applications
Are you seeking for a dependable and strong slurry pump? For many different industrial uses, the Standard NS Series Pump—with its semi-open impeller—is a great choice. Providing amazing performance, this pump can handle solid materials up to 50 mm and has a capacity of up to 350 m³/h and a head of up to 80 meters.
Why Do You Want the Standard NS Series Pump?
- Ideal for heavy-duty uses, this pump has a 350 m³/h capacity and an 80-meter head.
- Standard versions have an open impeller; closed impeller variants are available upon request. Every model features three or four impeller types, providing more flexibility in pipe connections.
- The unique end-suction, back-discharge design, lowers downtime and streamlines maintenance. Its back pull-out system simplifies servicing, and the general lifetime and minimal maintenance emphasis of the pump helps as well.
- Every impeller features back vanes that stop solid particles from getting into the seal chamber, therefore extending the lifetime of the seals. Further enhancing seal plate circulation and hence lowering leakage risk is the rear vane impeller design.
- Stainless Steel Chromium Martensitic Alloy (SSCMA) with 12% chromium content forms the casing and impeller; this material offers extraordinary corrosion resistance and hardness for long-term durability.
- The volute design allows equal hydraulic force distribution, so lowering radial strain on the impeller, increasing bearing and seal life, lowering hydraulic pulsation, and so improving operational efficiency. Designed for particular use, optimized efficiency curves
- Dual deep grooves ball bearings on both sides of the housing enable the pump to withstand heavy loads. An optional oil bath lubrication system can help to sustain high-temperature operations.
- Low-speed design lowers wear and tear, therefore extending the service lifetime of the pump.
- Excellent Material Layout
- SSCMA is standard material.
- Usually cast iron is used in pedestrian bearing construction.
- Shaft: Usually, stainless steel
- Typical is cast iron housing.
- Standard is the SSCMA impeller.
- For best endurance, mechanical seal choices include SiC vs. SiC seals with Viton elastomers. Working conditions between 80 °C and 120 °C are needed for NBR seals.
- Worldwide Standard In flanges: Designed to satisfy ISO 7005-2 1988 E, PN16 low-speed criteria.
- Two drive choices are direct-coupled systems or vee pulley belt-driven ones.
- Capacity: 350 m³/h with a head reach up to 80 meters.
- Speed falls between 700 and 3,600 rpm.
- Ten pipe sizes and five table sizes define here.
- Passage: 50 mm is maximum solid size.
Complete Accessibility of Spare Parts
For the Standard NS Series Pump, we provide a whole range of spare components including:
- Volute casing
- Lock nuts and bolts for the volute case.
- O-rings for Volute Casing
- Seal Plate
- Mounting an adaptor
- Bearing construction
- Shaft Bearing Cover Bearing cover bolt set
- Key is Mechanical seal for impellers
- Deep Grooves in Ball Bearing Design
Keywords: Slurry pump, Standard NS Series, Semi-open impeller, Open impeller, closed impeller, high capacity, high head, easy maintenance, corrosion-resistant material, SSCMA, high efficiency, dual deep grooves ball bearings, back vane impeller, mechanical seal, pump spare parts, distributoralatpks, aquaflow.